In boat building terms, the floors are like floor beams. They provide strength at the bottom of the boat. On the Golant Gaffer, the floors are made of Iroko hardwood and glued to the bulkheads. The piece of Iroko sized to become floors (and other parts) was too thick for my little hand circular saw,… Continue reading Making the floors
Author: The Slow Boat Builder
On to the Iroko
The doublers and floors are to be made of Iroko, a bit like mahogany (but less costly). Taking a rough sawn length of Iroko and feeding it through the thicknesser to produce a lovely planed board of the right thickness is very satisfying Also today was the first use of epoxy on the project. The… Continue reading On to the Iroko
Bulkheads all cut out
After a bit of a break, I finally cut out bulkhead number 7 this morning. That completes all the bulkheads. Which is a good job because I don’t have any 12mm plywood left. I do have a pile of offcuts which looks as much plywood as is in the bulkheads. Next job, before I start… Continue reading Bulkheads all cut out
More Pricking out
Looking back at my last post, I decided that I had missed showing an important step. Below, the picture shows the full scale drawing of the bulkheads. Or at least one half of each bulkhead. My process is to lay the drawing on the plywood and check where the centre line and waterline (line drawn… Continue reading More Pricking out
knocking out the Bulkheads
Well, hardly knocking them out, but making progress. I noticed that I have 8 bulkheads and a transom to cut out of 6 sheets of plywood. So a quick bit of sizing up was required. Easier to do this on A4 than full size. Phew! Can still be done. I have a new favourite tool… Continue reading knocking out the Bulkheads
Another Delivery of Wood
The Devon Hardwoods lorry arrived at the boat shed and offloaded a pile of Iroko. I spent some time measuring and recording all the pieces so that I can match them to my cutting list. There are two ways of buying timber. You can have the timber yard pick from their stock of rough… Continue reading Another Delivery of Wood
Finally Started
I have started to build a Golant Gaffer. If you would like to know more about the Golant Gaffer, have a look at the “Golant Gaffer” page where I will gradually fill in some of the story leading up to this point. When I say I have started, I mean that I have the plans… Continue reading Finally Started